Expo 2020 - Dubai, UAE
scroll to down
guarantee image

Sangoma Vega 100G The Most Resilient VOIP Gateway in its Class connects digital telephony equipment to IP networks. Each unit purchased is factory configured with capacity for 30 simultaneous calls. This unit cannot be expanded beyond 30 simultaneous calls. This excellent device has proven interoperability with a broad range of existing telecommunications and VoIP equipment.

The Sangoma Vega 100G VoIP gateway connects digital telephony equipment to IP networks. Each unit purchased is factory configured with a maximum capacity for 30 simultaneous calls.

The available Sangoma Resiliency Enablement Suite (SRES) makes the Sangoma Vega 100G the most resilient gateway in it is class. In the event of a WAN failure, IP phones behind the Sangoma Vega gateway can continue to call each other, be routed to a backup switch or connected directly to the PSTN. In addition, the use of the Sangoma Network Appliance Provisioning (SNAP) tool makes the Sangoma Vega 100G the easiest to provision gateway on the market. 

  • Fixed configuration of 30 VoIP calls
  • Supports dual gigabit Ethernet connections
  • Exclusive local survivability
  • Available SRES and SNAP support
  • Flexible call routing for fallback and least cost routing
  • Emergency PSTN backup
  • Voice, fax and modem Support
  • Interoperability with a wide range of legacy and IP equipment

E1/T1 interface can be independently configured as network side or terminal side. The Sangoma Vega 100G gateway can therefore be connected to a PBX or the PSTN. This configuration provides:




  • SIP
  • Up to 30 VoIP channels


Audio codecs:

  • G.711 (a-law/µ-law) (64 kbps)
  • G.729a (8kbps)
  • G.723.1 (5.3/6.4 kbps)
  • G.726
  • FAX Support – up to G3 FAX, using T.38
  •  Modem Support – up to V.90, using G.711


Telephony Interfaces

Primary Rate ISDN (User configurable NT/TE):

  • T1:






Private Wire (*400G)

  • E1:





CAS Private Wire (*400G


LAN Interfaces

  • 2 RJ–45s, 1000 BaseT / 100 BaseTX / 10 BaseT, full / half duplex



  • Caller ID presentation
  • Caller ID screening allows connections to be accepted only from selected call sources
  • SIP Registration & Digest Authentication


Operations, Maintenance & Billing

  • HTTP(S) web server
  • RADIUS Accounting & Login
  • Remote firmware upgrade:
  • Auto code upgrade
  • Auto configuration upgrade
  • SNMP V1, V2 & V3
  • TFTP/FTP support
  • VT100 – RS232


Routing & Numbering

  • Dial Planner – sophisticated call routing capabilities, standalone or gatekeeper/proxy integration
  • Direct Dialing In (DDI)
  • SIP registration to multiple proxies
  • NAT traversal


Security & Encryption

  • Management – HTTPS, SSH,  Telnet
  • Configurable user login passwords


Call Quality

  • Adaptive jitter removal
  • Comfort noise generation
  • Silence suppression
  • 802.1p/Q VLAN tagging
  • Differentiated Services (DiffServ)
  • Type of Service (ToS)
  • QoS statistics reporting
  • Echo cancellation (G.168 up to 128ms)

Contact us:

Mobile:  +971 54 4551689
All rights reserved for SENA Co.
scroll to top